How does skimmer work on pool

If there have been storms that result in more leaves and debris in the pool though, it may be a good idea to clean it more often. Check the skimmer basket to monitor for when it needs to be cleaned out. When this happens, you can use the vacuum in addition to the pool skimmer to ensure that the water stays clean. This will allow even more water to pass through the filter system in the pool which will result in cleaner water.

You might also need to use a manual skimmer or a bag skimmer to get larger debris off the bottom of the pool. Otherwise you could find yourself in need of draining your pool to remove stains from organic matter breaking down.

There are also different types of vacuums and cleaners for different types of pools , so you can keep that in mind as well. This essential part of a pool works to circulate and filter out larger contaminants in the water. This will cause the pump to take in air and run dry damaging the pump motor. This second pipe is an equalizer line to prevent the pump sucking air from an empty skimmer box.

If you ever want to empty the pool you can purchase a connector to join the two holes pipes together. When the pump is running water will be drawn from the bottom of the pool through the equalizer pipe into the filter pipe. Set the pump valve to drain and the pump will empty the swimming pool right to the bottom. There is no need to purchase a separate submersible pump or call in the pool service people. No, there is no need to remove the skimmer basket when manually vacuuming the pool.

Most skimmer boxes work with a skimmer suction plate inserted into the box to create a vacuum. The vacuum hose connects to the top of the suction plate. When you vacuum the pool the skimmer basket traps larger items of debris protecting the filter from becoming clogged up. If you are connecting an automatic suction cleaner you still leave in the skimmer basket to protect the filter from debris.

If you are vacuuming the pool to waste stormwater drain you can remove the skimmer basket because the debris is not going to the filter. I strongly recommend an in-ground pool is fitted with a bottom drain so the pool can be emptied without a separate pump. The plumbing from the bottom drain also acts as an equalizer to the skimmer box. When the water level is low water flows into the skimmer box to prevent the pump running dry. Simply place the filter bag into the skimmer basket and capture more dirt and debris than the skimmer basket alone.

When the filter bag is full of dirt throw it in the garbage bin and replace with a new filter bag. This prevents the filter from becoming clogged with dirt and reduces the frequency of filter cleaning. No, the filtration system only needs to be run 8 hours per day. This is enough time to filter all the water in the pool. I recommend to split the pump running time into two periods of 4 hours each. One period during the day and one during the night.

Relax in style on this glowing float. What do you think? Call us: Atlanta's Custom Pool Builder. Next Previous. Back to the Basics…. By wpPool Blog 0 comment 3 August, 0. Pool Equipment , Swimming Pool Skimmer. When the pool pump is turned off, the pivoting flap returns to its original position where it helps prevent the debris from re-entering the pool. At this point, the skimmer basket contains the debris from the pool surface and should be emptied routinely to ensure free water flow and maximum filtering ability.

On some pool designs, the skimmer is also used as a vacuum hose connection for the pool vacuum to keep the pool clean. In these cases, the person cleaning the pool would typically remove the skimmer basket to expose the water inlet to the pool pump.

A connection is made for vacuuming and then upon completion, the skimmer basket and lid are reinstalled.